1 0

    Custom Carbon Fiber Plate

    Custom carbon fiber plate cut to your dimensions — solid sheet, honeycomb, foam-core or quasi-isotropic. Instant quote, no minimum order, ships in 1 week. Up to 32.5″ × 32.5″.

    • Solid CF sheet, foam-core, honeycomb, and quasi-isotropic options
    • No minimum order
    • Ships in 1 week

    Need a specialty frame or mount? See our quadcopter frame, hexacopter frame, rc car chassis, rc car chassis plate, motor mount ring, motor mount square templates.

    Frequently asked questions

    What do you cut? Carbon fiber plate, cut to your size.

    Is there a minimum order? No. There is no minimum order.

    Can I upload a DXF? Yes. Upload a DXF for custom shapes, holes or notches, or enter length × width.

    Which plate families are available? Solid carbon fiber sheet, aramid honeycomb, foam-core and quasi-isotropic. Pick the thickness in the quote tool.

    Can I return a custom plate? No. Each plate is custom-made. Contact us if we make an error or it arrives damaged.

    How quickly do orders ship? Most orders ship in 1 week.

    What is the largest plate you can cut? Up to 32.5″ × 32.5″, in every plate type and thickness.

    Related

    View full details

    Need help before you order?

    Which carbon fiber plate should I pick?

    We cut carbon fiber plate only. Full comparison on our Material Guide.

    • Everyday plate, bracket or panel → Carbon Fiber Sheet (solid)
    • Thick but light panels for bending stiffness → Aramid Honeycomb or Foam-Core (sandwich)
    • Loads from many in-plane directions → Quasi-Isotropic

    Carbon fiber strength follows the fiber direction. If that matters for your part, mark the grain direction in your DXF notes.

    Need published strength numbers? Email contact@coolestcarbon.com before you order.

    Up to 32.5″ × 32.5″ in every plate. No minimum order. Ships in 1 week.

    How to measure
    1. Rectangle or square: measure length × width of the finished cut, the size you need installed, not leftover stock.
    2. Holes, notches or a custom outline? Upload a DXF on the Custom Carbon Fiber Plate page. It is the most accurate way to describe the cut.
    3. Pick material and thickness in the quote tool.
    4. A tape measure is fine for most panels. Calipers help on small parts.

    More detail: Measuring Guide. Questions: FAQ or contact us.